• Home
  • FAQs
SkateAdvisors is supported by its audience. When you buy something through our links, we may earn an affiliate commission

Do Skateboards Have A Front And Back? In-depth Explained in 2022

Do skateboards have a front and back? Yes, a skateboard consists of a front and a back. The front is the nose, while the rear is known as the tail.

Determining the front and tail is more accessible or more complex, depending on the design of the skateboard. Most skateboards feature a nose with distinctive bright hardware.

Thanks to that, you can easily distinguish it from the tail. Besides, older models have a raised tail, allowing you to recognize it quickly.

Do Skateboards Have a Front and Back?

do skateboards have a front and back

Most skateboards have a front and back

The nose and tail of the skateboards may at first glance be identical. However, if you take a closer look, you’ll notice that they’re a bit different.

The nose of your skateboard is usually much larger and wider than the tapered, slightly narrow, and shorter tail.

How to Determine the Nose and Tail on a Skateboard?

Many models now have noses that are very similar to tails, making it harder to determine them. Fortunately, there is still a way to find out. Here is how!

is there a front and back of a skateboard

Determine the front and back.

Step 1: Understand Your Board

It is essential to know its construction to distinguish the parts of your board. The fact is that most skateboards consist of the following parts:

  • Deck
  • Tail
  • Nose
  • Bearings
  • Wheels
  • Trucks
  • And others

Step 2: Find Hint

Place your board on a flat surface to observe. Chances are you will see a more slant end than the other. It is the nose of your skateboard.

Step 3: Utilize Measuring Tape

It can be challenging to tell the front and back of many models by looking at them. In this case, you will need the help of a tape measure. So get a tape measure ready, and you’re ready to go.

You need to locate the screw holes on both ends of the deck. Then, secure one end of the tape measure to the end of the plank edge and roll it to the nearby screw holes. It is the reading you need. Repeat this process for the other.

You will get two different readings, and one is larger than the other, for example, 7 inches and 6 inches. In that case, the 7-inch side is the front end, and the 6-inch is the back end.

For longboards, the short curved end is the nose, while the longer narrow end is the back.

Difference Between the Nose and Tail of a Skateboard

does a skateboard have a front and back

The difference between the nose and tail.

As mentioned above, many types of skateboards out there come in different shapes and designs. As a result, you may get confused when finding the front and back of the skateboard.

If your board is bidirectional, this distinction is unnecessary. If not, consider the following aspects to determine the front and back of your board.

Graphics, Inlays, and Colors

Many Skateboards feature brand names and different graphic designs on their surfaces. As a result, you can quickly identify the front and tail of your skateboard by observing it.

Let’s find the brand name or any text on the board’s surface. In most cases, the first letter will start from the front.

In addition, you should also pay attention to the lettering’s weight distribution and the balance in the design to find the nose of your board.

Color contrast can also be an important factor in distinguishing the nose and rear end. The skateboards’ noses are most vivid, and they have brighter hues than the rear end.

Shape

The front is slightly taller and longer, while the rear end is less tilted and smaller. The fact is that older boards feature longer and broader front kicktail.

Most skateboards are also designed to make the back end closer to the ground than the other, allowing you to perform tricks safely. So it is a clear marker to identify the front and tail.

However, the above markings are only accurate for basic skateboards. Therefore, they may not apply to some unique models.

So, it is wise to get help from an industry expert who can help you answer this question. Check out the following to know more:

Skateboarding With the Nose or Back?

Skateboarding with the front kicktail allows you to perform safer and easier tricks. That’s why the front of the board is made wider and broader compared to the rear end.

But, it is alright to ride with a skateboard tail. However, the back of your board will wear out sooner than the previous one.

Most boards allow you to ride from both ends. If you ask us which tip is safer for the procedure, it is the front. It is the broader part of the board, allowing you to perform tricks safely.

No matter what riding style you prefer, make your safety a priority when performing any tricks.

FAQs

1. Why Do Skateboards Have A Nose And Back?

Skateboarders have different preferences regarding skateboarding styles. For example, some prefer to skate the nose rather than the rear end, and vice versa. In general, it is a matter of personal preference.

2. What Is Twin-Tail Skateboards?

They are skateboards with two tails of the same size, “symmetrical.” Ishod Wair, the professional skateboarder, strongly endorses them,

3. Which End Is the Front Kicktail of a Skateboard?

The front end is the nose or front kicktail, while the back is the skateboard’s tail.

4. What Angle Is A Skateboard Tail?

The rear of the board, usually measured from the rear truck bolts to the end of the board.

Conclusion

Skateboarding is fun, but it will require some specialized knowledge to participate safely. So, the first thing that needs to be done is to define the skateboard’s nose and tail.

This article has given you the answer “Do skateboards have a front and back?” The answer is yes. You should keep in mind that the front and back of the skateboard are different between models.

Incoming search: is there a front and back of a skateboard, does a skateboard have a front and back

Click Here to Leave a Comment Below 0 comments

Leave a Reply:

back to top