SkateAdvisors is supported by its audience. When you buy something through our links, we may earn an affiliate commission

How To Build A Skateboard Ramp? Not As Hard As You Think!

Making outdoor ramps or indoor ramps is a fun activity for those who enjoy skateboarding or are attempting to raise one. But how to build a skateboard ramp? No worry, this article will show you the making process in detail.

How To Build A Skate Ramp?

how to build a simple skate ramp

Riding On A Skateboard Ramp Is An Challenging Activity

The keys how to make a skateboard ramp are normally maximizing available space, being secure, and remaining patient.

Step 1: Design Your Ramp

Maximize Your Space

Maximize space and examine your available area, both while you’re using the skateboard ramp or not. If you decide to construct a portable ramp, keep in mind any storage difficulties. 

If your garden or yard doesn’t have enough space for other activities, installing a skateboard ramp might not be the best idea.

Choose The Type Of Ramp You Wish To Construct 

You should consider what kind of skateboard ramp you want once you’ve got a better idea of the amount of space available to you. 

how to build a mini ramp for skateboarding

Mini Ramp

You can construct a brand-new micro-ramp into any shape, which is ideal for a small location. A DIY mini ramp or beginner ramp designed only for jumps might be restrictive, but it makes a good starting point for beginners.

As you polish your skill level, a standard ramp with 10-foot transitions and a tiny stairway is a nice upgrade and can be used in numerous ways.

Make A Blueprint To Help You Personalize Your Design 

Putting your thoughts on paper is the greatest way to gauge the amount of time and effort your project entails. It will also enable you to resolve any measurement-related difficulties that may occur. On the internet, you may get professional ramp plans.

We recommend getting free professional ramp plans on the Interest. Don’t spend your money on costly design software. To get started, look for free plans online, contact friends who are designers, or go to your neighborhood hardware shop. 

Don’t start building until you’re completely pleased with your blueprint. Frequent interruptions to adjust things while building might deplete your resources and lead to unwelcome frustration.

Step 2: Organize Building Materials

Make A List Of Building Materials 

Make a list of the power tools you’ll need based on your plan. Check with your local hardware shop to see if there are any better options. 

Certain pieces of wood, for instance, may create a better riding surface but may not withstand the rain. You can easily find screw heads and plywood pieces in any hardware shop, make sure the wood length and type you choose will be in line with your blueprint. 

how to build your own skate ramp

Plywood Skateboard Ramp

A cordless drill with an assorted drill bit would be useful but not required if you only want to use a standard screwdriver.

If you want to use steel coping instead of or with wood, you’ll need to contact local steel fabricators or scrap metal supermarkets.

Arrange Your Lumber

You might need to shape the stock to the desired specifications on your own. Alternatively, you can pay for a professional to do the job if you don’t want that sort of hassle.

Double-Check Your Measurements Before Cutting. 

Remember the proverb “measure twice cut once” before cutting or molding anything. If you’re hesitant, sketch up a fake setup since it’s better to make a mistake on paper than to damage the items and start over again. 

Keep Yourself Protected. 

Wear goggles to protect your eyes from dust and pieces of wood. Wear tight clothes because power tools can easily catch loose clothing.

Preserve The Wood To Help The Skate Ramp Last Longer 

Use water-resistant paint to give your ramp a smooth plywood surface and protect it from elements.

Step 3: Complete The Ramp By Assembling And Surfacing It

Assembling Pieces Of Woods Together

how to build a simple skate ramp

Remember To Assembling The Wood Pieces Carefully 

Make the ramp’s sides disappear by cutting two plywood sheets away. Then, create the frame using a lot of nails since each one provides extra stability to the ramp.

Install The Remaining Pieces Of Plywood

Place both 4×6” on top of the topmost 2×6” to create a safe edge for standing while walking down the ramp.

Nail two sheets of plywood together. To provide a seamless transition, the bottom piece of plywood should slightly overhang the entire ramp.

Create A Riding Surface 

First, place two sheets of lumber on top of the wood. The top layer of your ramp should be plywood or high-quality wood, and the bottom should be untreated plywood. 

It is advisable to sand down any rough edges or loose corners for a smooth skating experience. Keep in mind to always protect your material whether you’re using high-quality skatelite or less expensive plywood.

To provide an extra layer of safety, drape a tarp over your ramp. During the winter, shovel off any snow to prevent moisture from seeping through and warping your wood.

Remember to attach the steel plate to the ramp’s bottom by creating a hole for the screw using a countersink bit before screwing it in. This will guarantee that the screws are flush with the metal.

how to build a skateboard ramp

The Right Material Will Help Your Ramp Last Longer


If you don’t have a lot of time to go to the skate park or simply want a private space in your home’s outdoor space where you can skate with more confidence, a DIY ramp is a way to go!

You may also like:

Click Here to Leave a Comment Below 0 comments

Leave a Reply:

back to top